Colors: All Noise Pro kites have a black canopy and either a red or black leading edge and struts.
Material: Teijan Canopy & DP Dacron, strongest in industry.
Custom wingtip design: The BWS ‘Consistent Drive’ Wingtip design allows full flow through turns and NO stalling or dead spots.
EPI, Express Point Inflate: Single Entry Inflation Valve for pumping up the entire kite at one time. Small clips separate each strut chamber from the leading edge.
3 Strut hybrid design: Lightweight and reliable. Medium thickness struts for solid canopy shape, no flutters. 1 Piece bladder: Less welds = less chance of blowing out a seam.
Bridle: Compact with one pulley in the upper cascade for smoother depower and handling. All wearing lines have been removed. All rider control is direct.
Pump Valves: Intake valve pump attachment: Only one place to pump your kite from. Outflow dump valve: A larger valve for getting the air out of your kite quickly when packing up.
EPI nipples: These are the connection valves for the EPI system connecting the airflow of the LE to the struts. These are designed as small as possible to stop bridle snagging. Attachment points: Multiple reinforced LE webbings for bridle attachment. Sewn into LE frame for extra surf strength.
Dacron trailing edge: Dacron is a thick, tough material used in the LE and Struts. We use this on the Trailing edge and around the struts to strengthen the connection between the canopy and the structural frame. It also stops tears.
Seams: All Strut and LE seams are 10mm overlapping and reinforced with a 15mm seam tape. On the canopy we use a glued flat seam rather than the traditional over locking seam. The flat seam offers a double layer of cloth at the join which strengthens each thread hole and aligns the panels for the most precise build.
Scuff guards: The right amount of Scuffs in all the right places. Positioned so your kite will withstand being dragged over rough surfaces and not compromise the weight and strength.